| Name: | Compact Busbar Fabrication Machine | Bending Power Type: | Hydraulic And Pneumatic Hybrid |
|---|---|---|---|
| Pressure: | 40T Or 50T, Max. 80T | Die: | Fast Die Change |
| Air Source: | 0.6MPa | Equipment Dimension: | L680mm* W580mm* H2600mm |
| Workplace Size: | L450mm*W340mm | Power: | 220~230VAC 50~60Hz 80W |
| High Light: | 6mm Busbar Punching Machine,5mm Busbar Punching Machine,Copper Busbar Bending Machine |
||
Digital Control Busbar Punching Machine For Copper Bar Bending
Features And Advantages
1. Large output, which can reach the high output of oil pressure.
2. Low operating noise.
3. Faster speed and stable output.
4. The device is simple, easy to adjust and easy to maintain.
5. Convenient access to power sources.
6 No disturbance of the heating of the oil pressure system.
Function introduction
Digital bus bar punching machine is used to punch the two ends of busbar in one time to guarantee parallelism between busbar profile and conductor. This parallelism ensures the reliable connection between conductor and joint which can control joint temperature rising. Key point is that machine can adjust the rebound coefficient according to conductor’s material and width. Rebound coefficient varies by bending or different conductor width and this kind of adjustment can guarantee the parallelism.
Equipment data on digital copper bar punching machine
| No. | Parameters |
| Model | KD-YYJ-40(50)T |
| Bending Power Type | Hydraulic and pneumatic hybrid |
| Pressure |
40T or 50T, Max. 80T |
| Die | Fast die change |
| Workplace Size | L450mm*W340mm |
| Control Mode | Digital control |
| Air Source | 0.6MPa |
| Power | 220~230VAC 50~60Hz 80W |
| Equipment Dimension | L680mm* W580mm* H2600mm |
Contact Person: Tina
Tel: +8618115561910
Fax: 86-512-62761477-807
