Name: | Copper Busbar Bending Machine | Bending Power Type: | Hydraulic And Pneumatic Hybrid |
---|---|---|---|
Pressure: | 40T Or 50T, Max. 80T | Bending Thickness: | 3-10mm |
Die: | Fast Die Change | Workplace Size: | L450mm*W340mm |
Air Source: | 0.6MPa | Equipment Dimension: | L680mm* W580mm* H2600mm |
Power: | 220~230VAC 50~60Hz 80W | ||
High Light: | 8mm Copper Bar Bending Machine,9mm Copper Bar Bending Machine,0.6MPa Bus Bar Bending Machine |
8mm 9mm High Accurate Hydraulic Copper Bar Bending Machine
Principle characteristics
The gas-liquid supercharger uses the high-pressure gas produced by the compressor to deliver the compressed gas to the solenoid valve through the pipeline. The solenoid valve is controlled by the foot switch to control the work and return of the cylinder to achieve the purpose of punching. The compressed air can be stored in the air storage tank and can be used at any time, so there is no energy waste of the motor idling. Using the cylinder as the working part and the solenoid valve as the control element, the structure is simpler, the failure rate is low, the safety is high, the maintenance is simple, the maintenance cost is lower, and the production efficiency is high. The use of 220V power supply to control the solenoid valve is simple and convenient.
Function introduction
Copper Bar Bending Machine is used to punch the two ends of busbar in one time to guarantee parallelism between busbar profile and conductor. This parallelism ensures the reliable connection between conductor and joint which can control joint temperature rising. Key point is that machine can adjust the rebound coefficient according to conductor’s material and width. Rebound coefficient varies by bending or different conductor width and this kind of adjustment can guarantee the parallelism.
Equipment data on digital copper bar punching machine
No. | Parameters |
Equipment Code | KD-YYJ-40(50)T |
Bending Type | Pneumatic and hydraulic |
Pressure | 40T/50T Maximum 80T |
Mold | Easy To Change |
Table Size | 450mm*340mm |
Control Type | Digital Type |
Pneumatic Supply | 0.6MPa |
Power | 220~230VAC 80W |
Size Of Equipment | L0.68m*W0.58m*H2.6m |
Contact Person: Tina
Tel: +8618115561910
Fax: 86-512-62761477-807