| Bending Power Type: | Hydraulic And Pneumatic Hybrid | Pressure: | 40T Or 50T, Max. 80T |
|---|---|---|---|
| Die: | Fast Die Change | Workplace Size: | L450mm*W340mm |
| Air Source: | 0.6MPa | Equipment Dimension: | L680mm* W580mm* H2600mm |
| Power: | 220~230VAC 50~60Hz 80W | Model: | KD-YYJ-40(50)T |
| Key Selling Points: | High Accuracy | ||
| High Light: | 50T Busbar Punching Machine,0.6MPa Busbar Punching Machine,80W Busbar Punching Machine |
||
Pneumatic Hydraulic PLC Control Digital Busbar Punching Machine
Function introduction
Digital bus bar punching machine is used to punch the two ends of busbar in one time to guarantee parallelism between busbar profile and conductor. This parallelism ensures the reliable connection between conductor and joint which can control joint temperature rising. Key point is that machine can adjust the rebound coefficient according to conductor’s material and width. Rebound coefficient varies by bending or different conductor width and this kind of adjustment can guarantee the parallelism.
Features
1) Double-column shearing structure, no scraps and shear droops
2) Workstation of punching adopts single-arm type integral structure
3) PLC control
4) Hydraulic rubber hose adopts nationalstandard A type connection mode
Technical parameters
| No. | Parameters |
| Equipment Code | KD-YYJ-40(50)T |
| Bending Type | Pneumatic and hydraulic |
| Pressure | 40T/50T Maximum 80T |
| Mold | Easy To Change |
| Table Size | 450mm*340mm |
| Control Type | Digital Type |
| Pneumatic Supply | 0.6MPa |
| Power | 220~230VAC 80W |
| Size Of Equipment | L0.68m*W0.58m*H2.6m |
Contact Person: Tina
Tel: +8618115561910
