Product Details:
Payment & Shipping Terms:
|
Name: | Busbar Fabrication Machine | Pressure: | 40T Or 50T, Max. 80T |
---|---|---|---|
Feature: | One Time Molding | Workplace Size: | L450mm*W340mm |
Bending Thickness: | 3-10mm | Air Source: | 0.6MPa |
Bending Power Type: | Hydraulic And Pneumatic Hybrid | Die: | Fast Die Change |
Equipment Dimension: | L680mm* W580mm* H2600mm | Power: | 220~230VAC 50~60Hz 80W |
Other Name: | Busbar Punching Machine | ||
High Light: | 80W Busbar Manufacturing Machine,10mm Busbar Manufacturing Machine,ISO9001 Busbar Bending Machine |
High Accuracy Hydraulic Compact Busbar Manufacturing Machine
Principle characteristics
The gas-liquid supercharger uses the high-pressure gas produced by the compressor to deliver the compressed gas to the solenoid valve through the pipeline. The solenoid valve is controlled by the foot switch to control the work and return of the cylinder to achieve the purpose of punching. The compressed air can be stored in the air storage tank and used at any time, so there is no energy waste of the motor when idling. Using the cylinder as the working part and the solenoid valve as the control element, the structure is simpler, the failure rate is low, the safety is high, the maintenance is simple, the maintenance cost is lower, and the production efficiency is high. The use of 220V power supply to control the solenoid valve is simple and convenient.
Function introduction
Digital bus bar Hydraulic Punching Machine is used to punch the two ends of busbar in one time to guarantee parallelism between busbar profile and conductor. This parallelism ensures the reliable connection between conductor and joint which can control joint temperature rising. Key point is that machine can adjust the rebound coefficient according to conductor’s material and width. Rebound coefficient varies by bending or different conductor width and this kind of adjustment can guarantee the parallelism.
Equipment data on digital copper bar punching machine
No. | Parameters |
Model | KD-YYJ-40(50)T |
Bending Power Type | Hydraulic and pneumatic hybrid |
Pressure |
40T or 50T, Max. 80T |
Die | Fast die change |
Workplace Size | L450mm*W340mm |
Control Mode | Digital control |
Air Source | 0.6MPa |
Power | 220~230VAC 50~60Hz 80W |
Equipment Dimension | L680mm* W580mm* H2600mm |
Contact Person: Tina
Tel: +8618115561910