| Bending Thickness: | 3-10mm | Name: | Hydraulic Busbar Bending Machine |
|---|---|---|---|
| Bending Power Type: | Hydraulic And Pneumatic Hybrid | Pressure: | 40T Or 50T, Max. 80T |
| Die: | Fast Die Change | Workplace Size: | L450mm*W340mm |
| Thickness: | 3mm - 10mm | Air Source: | 0.6MPa |
| Power: | 220~230VAC 50~60Hz 80W | ||
| High Light: | Hydraulic Busbar Bending Machine,Digital Busbar Bending Machine,220V Busbar Fabrication Equipment |
||
Digital Hydraulic One Time Molding Busbar Bending Machine
Features And Advantages:
1. Large output, which can reach the high output of oil pressure.
2. Low operating noise.
3. Faster speed and stable output.
4. The device is simple, easy to adjust and easy to maintain.
5. Convenient access to power sources.
6 No disturbance of the heating of the oil pressure system.
Equipment Data On Digital Copper Bar Punching Machine
| No. | Parameters |
| Model | KD-YYJ-40(50)T |
| Bending Power Type | Hydraulic and pneumatic hybrid |
| Pressure |
40T or 50T, Max. 80T |
| Die | Fast die change |
| Workplace Size | L450mm*W340mm |
| Control Mode | Digital control |
| Air Source | 0.6MPa |
| Power | 220~230VAC 50~60Hz 80W |
| Equipment Dimension | L680mm* W580mm* H2600mm |
Features :
Power consumption is only: 10W, rated output force: 120KN, good stability, the output force change is only ±20Kg force within the 20mm boost stroke range, the equipment has high working efficiency, five to ten faster than ordinary hydraulic presses Times. Take the configuration of this model as an example, it can complete about forty cycles per minute. And the speed can be easily adjusted, the pressure can be easily adjusted, there is no requirement for the height of the mold, at any position, at any position during the pressing process, the workpiece is sensed and the pressure is started, and because of the unique soft in place, the workpiece Without any damage to the mold, it is immediately converted into a stable output of static pressure.
There are many types of equipment control systems, which are adapted to the needs of different users. They can have relay control circuits, PLC control circuits, and single-chip control circuits, which can realize man-machine dialogue, easy operation, and good safety performance. They are equipped with two-hand control methods. Infrared light curtain protection can be added to make the safety performance better.
The pressure can be displayed in real time and the pressure value can be displayed accurately. In addition, pressure control can be achieved, that is, after the required output pressure is set, the device can output the set force value, and the device will automatically return after reaching this force.
In addition, we can design corresponding actions according to customer requirements.
Contact Person: Tina
Tel: +8618115561910
Fax: 86-512-62761477-807
