|Name:||Bus Bar Bending Machine||Bending Power Type:||Hydraulic And Pneumatic Hybrid|
|Thickness:||3mm-10mm||Die:||Fast Die Change|
|Pressure:||40T Or 50T, Max. 80T||Equipment Dimension:||L680mm* W580mm* H2600mm|
|Workplace Size:||L450mm*W340mm||Air Source:||0.6MPa|
|Power:||220~230VAC 50~60Hz 80W|
3mm Busbar Bending Machine,
10mm Busbar Bending Machine,
3 In 1 Busbar Bending Machine
Fast Die Change 3mm 4mm Digital Busbar Bending Machine
1. Using compressed air as the power source, it is highly efficient and easy to operate, with simple structure and minimal maintenance.
2. There is no noise generated by the hydraulic system during standby, which can save power consumption and reduce production costs.
3. The height, speed, stroke, pressure and stamping time can be adjusted arbitrarily according to different products or molds.
4. Equipped with anti-rotation guide rods and guide plates, with high precision, which can adapt to high-speed precision blanking.
5. Two-hand control or foot pedaling can be selected. Ensure the personal safety of operators.
6. Using a microcomputer control system, the mode can be manual, semi-automatic and fully automatic. Heating molds, temperature control and pressure sensors can be added. The structure is simple, and pneumatic technology is adopted to realize that one air compressor can supply multiple pneumatic punching machines at the same time, which is more energy-efficient than electric punching machines. Reduce power consumption. The operation is simple, the safety type is high, the foot switch is used to control the solenoid valve, the structure is simple, the failure rate is low, and the production efficiency is improved.
Digital bus bar punching machine is used to punch the two ends of busbar in one time to guarantee parallelism between busbar profile and conductor. This parallelism ensures the reliable connection between conductor and joint which can control joint temperature rising. Key point is that machine can adjust the rebound coefficient according to conductor’s material and width. Rebound coefficient varies by bending or different conductor width and this kind of adjustment can guarantee the parallelism.
Equipment data on digital copper bar punching machine
|Bending Power Type||Hydraulic and pneumatic hybrid|
40T or 50T, Max. 80T
|Die||Fast die change|
|Control Mode||Digital control|
|Power||220~230VAC 50~60Hz 80W|
|Equipment Dimension||L680mm* W580mm* H2600mm|
Contact Person: admin