Product Details:
Payment & Shipping Terms:
|
Name: | Compact Busbar Fabrication Machine | Bending Power Type: | Hydraulic And Pneumatic Hybrid |
---|---|---|---|
Pressure: | 40T Or 50T, Max. 80T | Die: | Fast Die Change |
Workplace Size: | L450mm*W340mm | Thickness: | 3mm - 10mm |
Bending Thickness: | 3-10mm | Air Source: | 0.6MPa |
Power: | 220~230VAC 50~60Hz 80W | ||
High Light: | 9mm Busduct Production Machine,8mm Busduct Production Machine,Hydraulic Busduct Production Machine |
8mm 9mm One Time Molding Hydraulic Busduct Production Machine
Principle characteristics
1. Using compressed air as the power source, it is highly efficient and easy to operate, with simple structure and minimal maintenance.
2. There is no noise generated by the hydraulic system during standby, which can save power consumption and reduce production costs.
3. The height, speed, stroke, pressure and stamping time can be adjusted arbitrarily according to different products or molds.
4. Equipped with anti-rotation guide rods and guide plates, with high precision, which can adapt to high-speed precision blanking.
5. Two-hand control or foot pedaling can be selected. Ensure the personal safety of operators.
6. Using a microcomputer control system, the mode can be manual, semi-automatic and fully automatic. Heating molds, temperature control and pressure sensors can be added. The structure is simple, and pneumatic technology is adopted to realize that one air compressor can supply multiple pneumatic punching machines at the same time, which is more energy-efficient than electric punching machines. Reduce power consumption. The operation is simple, the safety type is high, the foot switch is used to control the solenoid valve, the structure is simple, the failure rate is low, and the production efficiency is improved.
Equipment Data On Digital Copper Bar Punching Machine
No. | Parameters |
Model | KD-YYJ-40(50)T |
Bending Power Type | Hydraulic and pneumatic hybrid |
Pressure |
40T or 50T, Max. 80T |
Die | Fast die change |
Workplace Size | L450mm*W340mm |
Control Mode | Digital control |
Air Source | 0.6MPa |
Power | 220~230VAC 50~60Hz 80W |
Equipment Dimension | L680mm* W580mm* H2600mm |
Features :
Power consumption is only: 10W, rated output force: 120KN, good stability, the output force change is only ±20Kg force within the 20mm boost stroke range, the equipment has high working efficiency, five to ten faster than ordinary hydraulic presses Times. Take the configuration of this model as an example, it can complete about forty cycles per minute. And the speed can be easily adjusted, the pressure can be easily adjusted, there is no requirement for the height of the mold, at any position, at any position during the pressing process, the workpiece is sensed and the pressure is started, and because of the unique soft in place, the workpiece Without any damage to the mold, it is immediately converted into a stable output of static pressure.
There are many types of equipment control systems, which are adapted to the needs of different users. They can have relay control circuits, PLC control circuits, and single-chip control circuits, which can realize man-machine dialogue, easy operation, and good safety performance. They are equipped with two-hand control methods. Infrared light curtain protection can be added to make the safety performance better.
The pressure can be displayed in real time and the pressure value can be displayed accurately. In addition, pressure control can be achieved, that is, after the required output pressure is set, the device can output the set force value, and the device will automatically return after reaching this force.
In addition, we can design corresponding actions according to customer requirements.
Contact Person: Tina
Tel: +8618115561910
Fax: 86-512-62761477-807