|
Product Details:
Payment & Shipping Terms:
|
| Description: | Belleville Spring Washers | Surface: | Dacro |
|---|---|---|---|
| Model: | φ75*5mm | Material: | Manganese Steel |
| Usage: | Increase The Load Capacity | Thickness: | 5mm,6mm |
| High Light: | Busbar Joint Belleville Washer,Busbar belleville spring washer,Zinc Plated belleville lock washer |
||
High Tension Busbar Joint Belleville Washer with Zinc-plated Surface
Belleville washer is to absorb loads by acting as a spring. When a load is applied a
Belleville washer, the washer compresses. At the same time, theBelleville washer
exerts an equal amount of force against the object.
| Model | Material | Hole Diameter | Surface Treatment |
| φ37*3mm | 65Mn | φ8.5mm | Galvanized Treatment |
| φ74*4mm | 65Mn | φ13mm | Dacromet Treatment |
| φ75*5mm | 65Mn | φ13mm | Dacromet Treatment |
| φ76*5mm | 65Mn | φ13mm | Dacromet Treatment |
| φ90*6mm | 65Mn | φ13mm | Dacromet Treatment |
What is Busduct Joint component?
Joint block is operatable by one / two shear off bolts.
Joint assembly can be removed / installed at any time in installed condition.
Disc spring washer are used in Uniblock joint to uniformly distribute pressure.
Recommended torque for tightening is 7 Kg-mtr.
These joints are specially designed to accommodate thermal expansion of busbars and housing.
Installation Guidence of Busduct Joint
Step1:dentify the correct joint stack (either 4W or 5W) and its phase orientation before Busduct joint pack installation
Step2: Align and connect both busduct terminal with joint stack connector.
Step3:Joint stack stopper acts a guideline to ensure a full contact surface of the overlapping conductors.
Step4: Tighten the double headed bolt by using socket wrench untile the outer head shear off.
Step5:Place joint pack covers on both sides of the busduct joint section and tighten all the bolts and nuts with socket wrench.
Contact Person: Tina
Tel: +8618115561910
Fax: 86-512-62761477-807
