|
Product Details:
Payment & Shipping Terms:
|
| Description: | PA66 Nylon Busbar Plugs | Color: | White |
|---|---|---|---|
| Model: | KD-05/15, KD-03/13, KDK-19, KDK-22 | Material: | PA66 |
| Remark: | 4P 5P | Usage: | Used For Busbar |
| High Light: | PA66 Busduct Outgoing Sheath,76mm Busbar Tap Off Unit,68mm Busduct Outgoing Sheath |
||
Busduct Outgoing Sheath for Busbar Tap Off Unit for Conversion
Its used for the prevent the dust and Sundries entering the tap off unite
| Model | Hole Diameter | Max. Diameter for Wire |
| KD-KT4 | φ76mm | φ68mm |
| KD-KT3 | φ66mm | φ54mm |
Installation Guideline of Tap Off Unit (Plug-In Type)
There are two types of plug-in tap-off units :
1) Plug-in tap-off units without automatic clamping system .
2) Plug-in tap-off units with automatic clamping system.
Step 1: Open or remove the tap-off unit cover.
Step 2: Install the protection device in the tap-off unit.
Step 3: Remove the IP protection on the outlet of the run component.
Step 4: Prepare the output cable glands and connect the cables to the tap-off unit.
Step 5: Check that the protection device is switched off and carefully inspect the tap-off unit for tools and objects that may have been left inside the tap-off unit.
Step 6: Position the rear of the tap-off unit on the run component.
Step 7: Plug the tap-off unit into the run component.
Step8: Lock the tap-off unit on the run component using the locking handle located inside the tap-off unit
Step9: Secure the tap-off unit on the run component using the fixing mechanism.
Step10: Close the tap-off unit cover. The system and the load are ready to be energized.
Contact Person: Tina
Tel: +8618115561910
Fax: 86-512-62761477-807
