|
Product Details:
Payment & Shipping Terms:
|
| Name: | M12 Joint Torque Bolt | Packing: | Plywood Case |
|---|---|---|---|
| Usage: | Used For Busbar Joint | Material: | High Tensile Steel |
| Certification: | ISO9001 | Other Name: | High Tensile Double Head Bolt |
| Other Name 2: | Shear Off Nut | Other Name 3: | Busbar Joint Torque Bolt |
| High Light: | 10.9S m12 bolt torque,ISO9001 Busway Torque bolt,ISO9001 m12 bolt torque |
||
Double Head Grade 10.9S Busbar Joint Torque Bolt with Galvanized
Features
Installed in joint for insulation
Material: 8.8 grade high tensile steel
Size and color can be customized
| Model | Class | Size of Square Nut | Thread Length | Torque Force | Color |
| M12*115 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*120 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*125 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*130 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*140 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M | Yellow/White Galvanized |
| M12*165 | 8.8 | 30*30mm/27*27mm | 45~65mm | 70 ~90 N.M |
Yellow/White Galvanized |
Installation Guideline Of Busduct Joint
Step1:dentify the correct joint stack (either 4W or 5W) and its phase orientation before Busduct joint pack installation
Step2: Align and connect both busduct terminal with joint stack connector.
Step3:Joint stack stopper acts a guideline to ensure a full contact surface of the overlapping conductors.
Step4: Tighten the double headed bolt by using socket wrench untile the outer head shear off.
Step5:Place joint pack covers on both sides of the busduct joint section and tighten all the bolts and nuts with socket wrench.
Contact Person: Tina
Tel: +8618115561910
